VU+ ZERO rev.2 H.265

! NOVO ! rev2

Powerful Features

It was certainly a challenging task to increase the affordability while not losing the performance that Vu+ pursues. So, ZERO comes with a dual core of 2000 DMIPSpowerful enough to support all demanding multimedia functions. Despite of its compact and slim design, all important connectors are nicely equipped as below. From rev.2 contain Vu+ Zero support for H.265 and in package is newest remote controller IR300 Universal

Vu+ Zero Features:

• Opera browser
• HbbTV
• HDMI 1.4 connection
• DVB-S2 tuner
• External 12 V power supply

Technical Highlights:

• 2K DMIPS processor
• DVB-S2 tuner
• 256MB Flash
• 512 MB DDR3 DRAM
• 1 x Smartcard-Reader (Xcrypt)
• 2 x USB
• 10/100 Mbit Ethernet Interface
• 1 x HDMI 1.4 video / audio output (digital)
• 1 x RCA video output (analog)
• 2 x Audio Output (L / R) RCA (analog)
• unlimited channel lists for TV / Radio
• EPG (electronic program guide) support
• Support of favorite lists (bouquets)
• OSD in many languages and skin-support
• expandable with plugins
• Automatic / manual channel search
• DiSEqC 1.0 / 1.1 / 1.2, USALS
• External 12V power supply
• Power switch

Vu+ Zero Specifications:

• DVB-S2 tuner:
• Input Frequency Range 950 ... 2150 MHz
• Input level range - 65 dBm ...- 25 dBm
• Tuner Input Connector F connector
• Input impedance 75 ohms
• AFC capture range +/- 3.5 MHz
• Demodulation QPSK and 8PSK
• Viterbi and Reed-Solomon FEC
• Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
• Roll-off Factor 35%

Video decoding:

• Video compression MPEG-2 / H.264 and MPEG-1 compatible
• Video Standard PAL G / 25 Hz, NTSC
• Aspect Ratio 4: 3/16: 9
• Letterbox for 4: 3 TV-Device

Analog output:

• Output Level L / R 0,5 Vss on 600 Ohm
• THD> 60 dB (1 kHz)
• Crosstalk <-65 dB

Video parameters:

• CVBS input level 1 Vpp +/- 0:25 dB at 75 Ohm

Ethernet:

• 100/10 MBit compatible interface

USB:

• USB 2.0 connection (2x)

LNB power and polarization DVB-S2 tuner:

• LNB Current 400mA max. Short-circuit protected
• LNB Voltage horizontal without load 19,5V17,6V at 400mA
• LNB Voltage vertical load without 14.5V 11.8V at 400mA
• LNB is switched off in standby mode

Control of the satellite position:

• DiSEqC 1.0 / 1.1 / 1.2 and USALS - Rotor Control

Power Consumption:

• <13W (in operation, with LNB)
• <12W (in operation, without LNB)
• <0.5W (Deep-Standby-Mode)

Input:

• External power supply:
• Entrance:
• 110-240V AC / 50-60Hz / 1,0A
• Exit:
• 12V = / 3,5A

General:

• Ambient temperature + 15 ° C ... + 35 ° C
• Humidity <80%
• Dimensions (W x D x H): 211 mm x 185 mm x 40 mm

Contents of Box:

• Satellite Receiver (Vu+ Zero)
• Remote control
• Batteries
• Cable for analog A / V outputs (3.5 mm jack)
• External IR sensor
• External power supply
• User manual